{"product_id":"dobot-cobot-welding-solution","title":"Dobot All-in-One Cobot Welding Solution – CR10A on Mobile Welding Platform","description":"\u003cp\u003e\u003cstrong\u003eA complete, mobile cobot welding cell.\u003c\/strong\u003e The Dobot All-in-One Welding Solution puts a Dobot CR10A collaborative robot on Dobot's mobile welding platform, ready for your MIG\/MAG welding set. Wheel it to the job, teach a weld with four points on a tablet and let the cobot lay consistent welds, batch after batch. It suits small-batch, high-mix fabrication: steel structures, frames, brackets, hardware parts and vessels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupplied on quotation.\u003c\/strong\u003e Prices start from £27,199 ex VAT for the CR10A cobot and the mobile welding platform. We build the rest of the cell around your welding machine and parts and send you a full quotation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the starting price includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDobot CR10A collaborative robot (part no. 1200000189):\u003c\/strong\u003e 6 axes, 10 kg payload, 1,300 mm reach, ±0.03 mm repeatability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDobot mobile welding platform (part no. 1300000564):\u003c\/strong\u003e a steel welding table on castors with levelling feet, weighing about 40 kg. The table top has evenly spaced threaded holes, so you can fix the cobot and your clamps in any position. It comes with the electrical components, the robot control box and welding control box built into the frame, mounting plates for your wire feeder and wire reel, a fixture and a cable hook.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDobot Welding Process Package:\u003c\/strong\u003e the welding software in DobotStudio Pro. You pick your welding machine brand, set the welding parameters and build the weld with blocky programming. No coding is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included: supply your own or we quote them\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWelding power source, wire feeder, robot welding torch and welding wire. Dobot marks these \"integrate by user\". Use the welding set you already have if it is compatible (see the list below), or we can quote a matched package.\u003c\/li\u003e\n\u003cli\u003eShielding gas, cylinder and regulator.\u003c\/li\u003e\n\u003cli\u003eOptions: laser seam sensor for laser positioning and laser tracking, torque sensor, gateways, protective gear.\u003c\/li\u003e\n\u003cli\u003eDelivery, installation and on-site training: quoted to suit your site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy weld with a cobot?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use.\u003c\/strong\u003e Plug-and-play set-up, quick configuration and blocky programming on a tablet. Operators without robot experience can set up a weld in four points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible switching.\u003c\/strong\u003e The light platform has a small footprint and moves between stations, even in tight spaces. It is ideal for changing jobs and short runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent quality.\u003c\/strong\u003e Every weld follows the same path, speed and parameters, which cuts rework. It also helps where skilled welders are hard to find.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe collaboration.\u003c\/strong\u003e A PLd Cat. 3 safety controller with 20+ safety functions and 5-level collision detection. The robot is certified to EN ISO 13849-1, EN ISO 13849-2 and EN ISO 10218-1, so it can work beside people without a safety fence, subject to your risk assessment. Its electromagnetic brakes stop it within 18 ms and hold position within 1 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSet up a weld in 4 points\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSet the approach point A, where the torch comes in to weld.\u003c\/li\u003e\n\u003cli\u003eSet the starting point B, where the arc turns on.\u003c\/li\u003e\n\u003cli\u003eSet the ending point D, where the arc turns off. Point C is an optional turning point.\u003c\/li\u003e\n\u003cli\u003eSet the exit point E, where the torch moves away.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eStraight lines, arcs and circles are set up directly with blocky programming.\u003c\/p\u003e\n\n\u003ch3\u003eWelding functions in the Dobot Welding Process Package\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeaving (arc oscillation) with no programming:\u003c\/strong\u003e sawtooth, spiral, trapezoid, sine, crescent and triangle patterns. You can set the amplitude, frequency, left and right dwell time and start direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-layer, multi-pass welding\u003c\/strong\u003e for thick plate. It repeats passes to fill wide weld seams.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch positioning (wire touch sensing).\u003c\/strong\u003e It finds the real position of a misplaced part and corrects the weld points. It works in 1D, 2D, 2D+, 3D, 3D+ and on inner or outer diameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAST through-arc seam tracking.\u003c\/strong\u003e In thick plate welding it follows the seam using the welding current, compensating for misalignment and heat distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser positioning and laser tracking\u003c\/strong\u003e, with the optional laser sensor. These are for short seams, long and large parts, and heat-sensitive or distorted parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent (stitch) welding.\u003c\/strong\u003e It stores points quickly and reduces heat distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc retry and arc restart.\u003c\/strong\u003e If rust or oxide stops the arc striking, it tries again. If the wire, gas or machine interrupts the weld, it restarts and finishes it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-task scheduling.\u003c\/strong\u003e One cobot runs several welding jobs one after another.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual and set-up functions:\u003c\/strong\u003e wire feed, wire back, gas check, simulated run (dry run), spot welding, drag-to-teach, saved points, anti-collision torch support, wire positioning, wire-stick removal and a welding process library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser welding\u003c\/strong\u003e is supported with a compatible laser welding source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCP\/IP secondary development.\u003c\/strong\u003e You can write your own welding software, with commands for welding speed, weaving, multi-pass, tracking and offsets, pause and resume, and live machine status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWorks with your welding machine\u003c\/h3\u003e\n\u003cp\u003eThe welding process package is set up for 15+ leading welding machine brands: Fronius, EWM, Lincoln Electric (Digiwave and Powerwave), OTC Daihen, Panasonic, Lorch, Megmeet, Aotai, Flama, Hypertherm, Miller, GYS, Kemppi, ESAB, CLOOS and SKS. Other machines can be connected through analogue I\/O. Four communication methods are supported: DeviceNet, EtherNet\/IP, Modbus and analogue. Tell us your machine and we will confirm it works before you order.\u003c\/p\u003e\n\n\u003ch3\u003eDobot CR10A specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAxes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePayload\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReach\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRepeatability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAbsolute accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.4 mm (laser-calibrated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRobot weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIP rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 47–63 Hz; typical consumption 350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 × Ethernet (TCP\/IP, Modbus TCP, EtherNet\/IP, PROFINET); RS485 (Modbus RTU); Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLd Cat. 3 safety controller, 20+ safety functions, 5-level collision detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReliability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMTBF 30,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDobotStudio Pro with the Dobot Welding Process Package (tablet, PC or teach pendant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOther set-ups on request\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDobot Mobile Magnetic Welding Solution:\u003c\/strong\u003e a CRA cobot on a magnetic base that sits directly on large steel workpieces. It suits non-standard and one-off parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther CRA cobots:\u003c\/strong\u003e payloads from 3 kg to 20 kg and reaches from 620 mm to 1,700 mm. The CR10A with SafeSkin (CR10AS) is also available.\u003c\/li\u003e\n\u003cli\u003eAlready have a CRA cobot? The \u003ca href=\"\/products\/dobot-cr-collaborative-robot-solutions\"\u003emobile welding platform is also sold on its own\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn use\u003c\/h3\u003e\n\u003cp\u003eDobot welding cobots work in shipbuilding, steel structures, bed and machine frames, and carbon steel fabrication. In one Dobot case study, a steel structure maker whose products need more than 200 welds each replaced manual welding with 10 Dobot cobots. Now 2–3 staff run production around the clock, and flatness and consistency have improved.\u003c\/p\u003e\n\n\u003ch3\u003eSupport\u003c\/h3\u003e\n\u003cp\u003eSupplied in the UK by LATHELAND, with help to choose, set up and integrate your cell. Dobot provides a standard 12-month warranty, which can be extended, as well as remote diagnostics, online and on-site training, and tutorial videos.\u003c\/p\u003e","brand":"Dobot","offers":[{"title":"Default Title","offer_id":55023174713690,"sku":"1300000564+1200000189","price":27199.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0924\/6795\/4010\/files\/dobot-welding-01-main.jpg?v=1792333637","url":"https:\/\/www.latheland.co.uk\/products\/dobot-cobot-welding-solution","provider":"LATHELAND","version":"1.0","type":"link"}